WatchDog Alerts
Posted: 25 May 2010 7:33
Greetings!!!
We were getting all the watchdog process alerts (All Control-M WatchDog processes are alive) for every 2 hours on the alerts window. Two weeks ago these alerts were stoped suddenly. We have not done any changes to the config.dat file.
I have tried the follwing to restart watchdog process automatically. But it was not successfull.
NOTE: We do not have any jobs/scripts setup to generate these alerts.
1. Loged into the Control-M Server
2. Looked up the PID of the currently running watchdog process using the following command:
ps -ef | grep p_ctmwd
3. Once after finding the PID ran the following command to kill the Watchdog process:
kill <pid>
The Watchdog process did NOT restart automatically.
Any advise or suggestions are greately appreciated.
Thanks
Venkat
We were getting all the watchdog process alerts (All Control-M WatchDog processes are alive) for every 2 hours on the alerts window. Two weeks ago these alerts were stoped suddenly. We have not done any changes to the config.dat file.
I have tried the follwing to restart watchdog process automatically. But it was not successfull.
NOTE: We do not have any jobs/scripts setup to generate these alerts.
1. Loged into the Control-M Server
2. Looked up the PID of the currently running watchdog process using the following command:
ps -ef | grep p_ctmwd
3. Once after finding the PID ran the following command to kill the Watchdog process:
kill <pid>
The Watchdog process did NOT restart automatically.
Any advise or suggestions are greately appreciated.
Thanks
Venkat