Order/Force with Hold disable.

futre25 · Post by **futre25** » 09 May 2011 5:14

Hi to all.

I have a small problem or question.

Since last week I have disabled the option 'Order/Force with Hold' when I force a table or job. Why?. I have not changed anything.

Some jobs are needed to force with this option.
Where you enable/disable this option.

Thanks for your help.

philmalmaison · Post by **philmalmaison** » 11 May 2011 11:33

Hi,
Something can have changed in your authorization profile, as control on Jobs
Regards,
Philmalmaison

nicolas_mulot · Post by **nicolas_mulot** » 11 May 2011 5:31

futre25,

Please be a bit more detailed in your explanations.
You say “I have disabled …” then “I have not changed anything” in the same line, which is what I would call a contradiction.

What are exactly the symptoms?
Under which environment do you observe the problem: desktop, EM GUI, ctmorder, daily … ?

The force is an option (check box) you may specify when ordering a job or table under the desktop. I am not aware that force option can be restricted to those users which are allowed to order jobs or tables.
The force option is an optional parameter (-force y) you may specify when calling the ctmorder utility to order jobs or tables.

Depending on the version (sure for 6.3.0 and above), you may set a specific parameter at the control-m server level, which turns every order request to a force request. This behaviour is certainly not recommended as a general setting, and is not the default.

Cheers
Nicolas Mulot

futre25 · Post by **futre25** » 12 May 2011 10:35

Hi,

excuse me for my bad english.

I meant that I found disabled this option.

I tried searching my authorization profile.
Please, you can tell me where to find and how I can modify.

Thanks to all for your response.

Sobriquet · Post by **Sobriquet** » 17 May 2011 6:43

Hi,
Only Admin-Group will have authorization to edit these options.

Authorizations -> Scheduling Table

You can add specific authorizations to the user.

------------Sri

futre25 · Post by **futre25** » 17 May 2011 5:11

Hi to all

I think that I explained very bad.

When I want to order or force a table from Order/Force Jobs, the option Order/Force with Hold is disabled. how I can enable...?

I am emuser and the Tools -> Authorizations -> Scheduling Table, I have:

Sheduling Table = * and Access Level = Full in Group Administrations = AdminGroups.

The problem is that I get up and leave jobs to be confirmed, but I have the options disabled, I have to change it every time on your desktop

I hope someone can give me a solution.

Thank you very much everyone for your help and answers.

[/img]

futre25 · Post by **futre25** » 17 May 2011 5:15

Hi.

As can i change the specific autorizations the my user.

You can give me an example for my case.

Thanks the new to all.

Walty · Post by **Walty** » 18 May 2011 10:14

Hi,

This function is available only on v6.2.01 and later.
Not available with earlier versions (Order/Force with Hold option is grayed out)

futre25 · Post by **futre25** » 19 May 2011 10:02

Ok, thanks very much for your reply.

I've solved the doubt.