Defining BIM job for z/OS

Everything about Batch Impact Manager Server and Web access installation or setup.
Post Reply
User avatar
jdj420
Nouveau
Nouveau
Posts: 32
Joined: 06 Aug 2008 12:00

Defining BIM job for z/OS

Post by jdj420 » 05 Mar 2013 10:40

I just started with BIM and need to define BIM jobs for our z/OS but I cannot seem to figure out how to get this accomplished. Any information will be greatly appreciated.

User avatar
bridanp
Nouveau
Nouveau
Posts: 1
Joined: 22 Mar 2011 12:00

Post by bridanp » 08 Mar 2013 4:28

If not answered already.... The z/OS job needs to have a global Out condition set. You can find the global condition prefixes available to your site from the C-M/Desktop under Tools -> Global Condition Prefixes. Not sure if this is the default or not, but we use G- to let the systems know that the condition is of the global variety. So my example would be G-PST12345-ENDED, where the PST12345 is my z/OS job that I want the BIM to follow.

A BIM job should be setup on the distributed side with the previously mentioned Out condition set as its In condition. I name those like PST12345_BIM.

Think that gets you where you need to be without telling you exactly how to setup the BIM itself.

Post Reply