Dynamic filter

meelle · Post by **meelle** » 07 Jun 2007 4:34

I create some dynamic filter on control M and that disappear with the next execution.
Do you have an idea where it is saved.
Thanks

avaidya10 · Post by **avaidya10** » 07 Jun 2007 5:20

It's dynamic meaning not saved any where.
if you need a filter you can use over and over just create a standard filter.
dynamic filter does keep it's setting until you chage your criteria.

Ash

Partoutatis · Post by **Partoutatis** » 08 Jun 2007 9:30

In ControlM-EM version 6.2.01, you have the possibility of making a safeguard of the filter (case Filter Presets).

Select your filter and click OK to apply this.

mauriziog · Post by **mauriziog** » 08 Jun 2007 6:17

From version 6.2 is possible to save in the dinamic filter the.
"filter preset" so you can same some dinamic filter settings.

But the dinamic filter is dinamic, not permanent filter.
so if you want a true permanent and static filter you can define it in the view point manager. So it is avaqilable from the list in all the viewpoints.

have a good day

meelle · Post by **meelle** » 08 Jun 2007 6:30

I use Control ME version 6.1.
I think the filter is saved temporary.
If I could know where;I think I will be able to replace it manually.

Walty · Post by **Walty** » 11 Jun 2007 8:48

Hi,

You can define the path where the Dynamic filters are saved.
In EM Gui chose:
1) Tools
2) Options
3) General
4) In Filter Presets/Presets location put the path where your Dynamic filters will be located. The name of this file is : Presets.ini

Regards
Walty

meelle · Post by **meelle** » 11 Jun 2007 12:11

Thanks to all, Now I can save and upload my filters

Dynamic filter

Dynamic filter

Dynamic is the key word !!

Dynamic filter